Ich kann die Firmware auf meinem Trezor T nicht aktualisieren – habe es mehrmals versucht… Erreiche immer das gleiche DEADEND

[root_s2yse8vt]

Up

0

Down

::

Trezor Suite sagt, ich solle die Firmware meines Trezor T aktualisieren, wenn ich mich anmelde.

Doch jedes Mal, wenn ich beim Einstecken in einen USB-Anschluss über den Bildschirm wische, wird Bootloader 2.03 Firmware 2.3.4 angezeigt, und es heißt, ich solle zu [trezor.io/start](https://trezor.io/start).

Wenn ich das tue, kann ich keinen Link zum Aktualisieren der Firmware sehen. Was muss ich tun?

[matejcik]

Up

0

Down

::

just … don’t go anywhere, stay in Suite

[Crypto_Cat_34_32]

Up

0

Down

::

On the settings page (https://suite.trezor.io/web/settings/device) there is a section for firmware version and it should allow you to upgrade from there.

[Tweldorian]

Up

0

Down

::

Thx guys,tried your suggestions staying in the Suite and choosing Settings, but still get exactly the same result and issue.

The Trezor T just stays/freezes on the Bootloader screen telling me to go to [https://trezor.io/start](https://trezor.io/start) and

The Suite stays on the Reconnect your Trezor in bootloader mode (graphic swipe vid) where it says (1) Disconnect your Trezor and (2) Swipe your finger across the touchscreen while connecting cable, and just stays with the thumb swipping downwards.

Any other ideas on how I can progress past this bottleneck??

[Tweldorian]

Up

0

Down

::

Success, but only after I deleted the Suite, Bridge, and reinstalled the latest version of Suite.

Sounds obvious now, but I wonder if including instructions on doing just that for a firmware update might be a good idea to include on the [https://trezor.io/start](https://trezor.io/start) page, since I was directed there with no further instructions on what to do.

Thx for your help, guys. Hope this thread might help others in this predicament.

[Autor]

Beiträge