Kennzeichnung auf der Rückseite des Tresors 3

[root_s2yse8vt]

Up

0

Down

::

Ich habe meinen Safe 3 vor kurzem erhalten und aufgestellt, alles schien in Ordnung zu sein, aber er hat eine kleine Markierung auf der Rückseite. Der Trezor-Support sagt, dies entspreche “dem aktuellen Standardzustand von Artikeln aus unserer Serienproduktion”.

Bevor ich ihn weiter verwende, wollte ich fragen, ob jemand von Ihnen ähnliche Markierungen hat?

[risa6550]

Up

0

Down

::

I have the exact same in the same spot and I’ve seen multiple on here too, it looks to be from the injection molding process of the plastic body

[BillMcN3al]

Up

0

Down

::

I would certainly be worried about the red arrow

[Ant1sociaI]

Up

0

Down

::

Same.
Didn’t worry about it.

[Successful-Walk-4023]

Up

0

Down

::

Same markings. It was explained to be due to part of the manufacturing process so all is well.

[Sarvey186]

Up

0

Down

::

I have the same on the orange limited one, poor finish but whatever when it works

[grzesiolpl]

Up

0

Down

::

It is the point where template is cut out from the rest of the

[CryptoYuzu]

Up

0

Down

::

Completely normal. All 3 of my Safe 3 has that. Like other people mentioned, it’s from the molding.

[Miadas20]

Up

0

Down

::

Everyone has that it’s part of the manufacturing mold.

[kombosorg]

Up

0

Down

::

I’ve got 4x trezor safe 3 and was actually looking at these marks. All my 4 wallets had them slightly different. Seems like a mold injection artefact during the production phase.

[Fun-Character1500]

Up

0

Down

::

Mine too. But it’s normal

[rubymig]

Up

0

Down

::

Mine came with a small screen scratch… But everything sealed

[joeltang]

Up

0

Down

::

The model T has a flawless laser seal. No ridge at all.

[xRandomDude11]

Up

0

Down

::

I have the same mark. Got mine 3 weeks ago. Ordered from Trezor.io. The package was completely fine.

[Beautiful_Mirror_459]

Up

0

Down

::

Same mark here. They could really do a better job about this we spent $70 on this after all

[Money-Ad-6902]

Up

0

Down

::

What is the red arrow?

[UpsetPush]

Up

0

Down

::

Same

[sw4kbox]

Up

0

Down

::

same thing on mine, these are injection molded cases and you’re looking at a “tree” mark (where the mold was broken off the main injection line.)

i just took a 5000 grit file and cleaned mine up so it was smooth.

[Asxinvestor84]

Up

0

Down

::

Just checked my one…. yeah i have it too… must be injection mould mark like others said

[Autor]

Beiträge